Login |Register |Contact Us |My Cart ( )

Thank you for Registering with Bimake!

close

Products

Home > Animal Experiment > Mouse CD8+ T-Cell Isolation Kit

Mouse CD8+ T-Cell Isolation Kit 

The Mouse CD8+ T-Cell Isolation Kit performs negative sorting by magnetic beads to isolate CD8+ T cells from single-cell suspensions of mouse spleen cells or other tissues.
Cat.No. Size Price Quantity  
B90011 For 109 cell USD 839
Free Overnight Delivery on all orders over 500 USD.
Tel: (832) 582-8158Email: [email protected]

Advantages

Easy& fast:the sorting can be completed in 15 minutes
No columns required:use magnetic separator
High purity:purity above 95%
High cell viability:cells function well, without antibody and magnetic labeling
Strict quality control:particle size control, surface modification control

Description

The Mouse CD8+ T Cell Isolation Kit isolates CD8+ T cells from single cell suspension of mouse spleen cells or other tissues by negative sorting. The principle is to use different biotin-labeled monoclonal antibodies to label non-target cells (non-CD8+ T cells), and then use streptavidin (streptavidin)-labeled magnetic beads to remove non-target cells, thereby to achieve the purpose of mouse CD8+ T cell sorting. The sorting process requires the use of a magnetic stand.

Application

Isolation of mouse spleen CD8+ T cells
Isolation of mouse lymph CD8+ T cells

Schematic Diagram of Isolation:

CD8+ T cells are isolated from spleen cells of C57BL/6 mice, and the cells before and after sorting are labeled with FITC anti-mouse CD8 antibody (clone number GK53-6.7) for flow cytometry analysis. CD8+ T cells before and after sorting are analyzed by flow cytometry. Purities are 13.8% and 97.1%, respectively.

Components

Reagent For 109 cell
Biotin-Antibody Mix 200 μl
Streptavidin 2 ml

Storage

Store at 2-8°C, valid for two year, do not freeze.

Protocol

Taking the isolation of mouse spleen CD8+ T cells as an example

1. Preparation of cell suspension: Grind the spleen on a 70 μm cell mesh, rinse the cell mesh with pre-cooled PBS, collect the cell suspension in a 50 ml centrifuge tube, centrifuge at 500 g for 5 min.
2. After centrifugation, discard the supernatant, add 5 ml of ACK erythrocyte lysate, lyse at room temperature for 5 min, then add 20 ml of PBS and centrifuge at 500 g for 5 min.
Tip: The amount and time of the red blood cell lysis step can be adjusted according to the different lysis solutions used. A small amount of residual red blood cells will not affect subsequent sorting and cell purity.
3. After centrifugation, the supernatant is discarded, the splenocytes are resuspended in PBS, and the cell suspension is filtered through a 70 μm cell mesh before counting. After counting, continue to centrifuge at 500 g for 5 min.
4. After centrifugation, discard the supernatant, resuspend the cells in sorting buffer, and adjust the cell density to 1×108 cells/ml.
Tip: The sorting buffer is PBS containing 2 mM EDTA and 2% fetal bovine serum (FBS) or PBS containing 2 mM EDTA and 0.5% BSA, which needs to be sterilized by filtration through a 0.22 μm filter in advance.
5. Add 100 μl of cell suspension (1×107 cells) to the bottom of the sterile flow tube, then add 2 μl of Biotin-Ab Mix, and incubate at 4°C for 10 min after mixing.
Tip: When adding the cell suspension, add cells to the bottom of the flow tube and avoid adding them along the wall of the flow tube. Depending on the characteristics of the magnetic stand used, centrifuge tubes can also be used for cell sorting. If more cells were sorted, proportionally increase the amount of Biotin-Ab Mix.
6. After the incubation, add 20 μl Streptavidin beads to the flow tube (vortex to resuspend the magnetic beads before use), and incubate at 4°C for 10 min after mixing.
Tip: If more cells are isolated, proportionally increase the amount of Streptavidin beads. For example, if 5×107 cells are sorted, 10 μl Biotin-Ab Mix and 100 μl Streptavidin beads should be added to 500 μl cell suspension. If sorting less than 1×107 cells, make up the cell suspension volume to 100 μl, use 2 μl Biotin-Ab Mix and 20 μl Streptavidin beads.
7. After incubation, add 2.5 ml of isolation buffer to the flow tube, and mix by pipetting up and down for 5 times (avoid vigorous shaking or inversion).
8. Place the sorting flow tube containing the cells on a magnetic stand and let stand for 5 min.
9. Gently pour the cell suspension into a sterile centrifuge tube (the flow tube should not fall off the magnetic stand during the pouring process), centrifuge at 500 g for 5 min. The cell suspension contains purified mouse CD8+ T cells. After centrifugation, the supernatant is discarded and the cells are collected.
10. After washing the cells according to the needs of the experiment, resuspend the cells in the desired buffer or medium and use them for subsequent molecular biology or cell biology experiments.

Trouble Shooting

Problem Potential Cause(s) Suggestion(s)
Insufficient cell purity Inactivation of reagents due to prolonged storage or improper storage conditions Use the new kit
Insufficient tissue grinding Increase grinding time
Tissue and cell clumps in cell suspension Filter cells using a cell strainer
Small number of isolated cells Insufficient tissue grinding Increase grinding time
Insufficient volume of reagent added Adjust the volume of the reagent according to the instructions

File Download

Mouse CD8+ T Cell Isolation Kit

Tech Support & FAQs

If you have any other inquiries, please leave a message.

  • * Indicates a Required Field
  • * Name cannot be empty
  • * Provide a valid email address
  • * Comments cannot be empty
  • Submit